Alkylation of benzene with 1-dodecene catalyzed by modified clays

• Tania Oberto Universidad del Zulia-Venezuela
• Jorge Sánchez Universidad del Zulia-Venezuela
• Eduardo González Universidad del Zulia-Venezuela
• Roger Solano Universidad del Zulia-Venezuela
• Gabriela Carruyo Universidad del Zulia-Venezuela
• César Morán Universidad del Zulia-Venezuela
• Alexander Moronta Universidad del Zulia-Venezuela

Resumen

A natural smectite clay (STx-1, USA), was ion-exchanged with Al, Cr and Fe or pillared with the same cations. Samples combining these two treatments were also obtained. The prepared solids were characterized by X-ray fluorescence diffraction (XRF), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and N2 adsorption. The catalytic activity was evaluated by using the alkylation of benzene with 1-dodecene. XRF results showed an increase in the metal content, giving evidence that the metal was effectively exchanged or deposited over the starting material. Al- and Fe-pillared clays showed a significant increase of the surface area, but this was not ob served for the Cr-pillared one. Ion exchanged clays showed similar surface areas to that of the starting clay. From XRD results, only the Al-pillared clay gave an increase of the d-spacing. All catalysts showed low conversions to wards the product of interest, and this is perhaps attributed to lack of molecular accessibility in the clay gallery or that there are no strong acid sites able to catalyze the alkylation, but strong enough to induce 1-dodecene isomerization. Moderate conversions were observed (27% for the most active catalyst, Cr/ST-P-Al).