Risk assessment in the Nanofluid stabilization process and optimization of process parameters by HAZOP methodology

• Mehrzad Zandieh Universidad del Zulia
• Mehrazad Zandieh Depatment of Biology, Faculty of science, Islamic Azad University

DOI: https://doi.org/10.46925//rdluz.30.03

Resumen

In this article, a risk assessment of the Nanofluid stabilization process was made in order to optimize the process parameters using the HAZOP methodology. The results showed that the main parameters for the HAZOP risk assessment are as follows: the weight fraction of the surfactant, the temperature when the surfactant is used, the pressure and the speed of the fluid in the homogenizer, the PH solution, the time and the power of ultrasound, the temperature of the stabilization process, the volume fraction of nanoparticles, the size of the nanoparticles, the side surface to the volume of Nano particles, zeta potentials, Nanofluid concentrations. The results of the risk number calculations before control actions showed that after control actions, all risk numbers decreased 50% and more, so this decrease was significant. This decrease showed that all control actions were appropriate and effective.

Citas

Aberoumand, Sadegh, Jafari Moghaddam, Amin, (2017). Experimental study on synthesis, stability, thermal conductivity and viscosity of Cu–engine oil nanofluid, Journal of the Taiwan Institute of Chemical Engineers, Volume 71, February 2017, Pages 315-322.

Amalraj, Shankar, Michael, Prawin Angel (2019). Synthesis and characterization of Al2O3 and CuO nanoparticles into nanofluids for solar panel applications, Results in Physics, Volume 15, December 2019, 102797.

Ananda Kumar, S., ShreeMeenakshi, K., Narashimhan, B. R. V., Srikanth, S., Arthanareeswaran, G., (2009). Synthesis and characterization of copper nanofluid by a novel one-step method, Materials Chemistry and Physics, Volume 113, Issue 1, 15 January 2009, Pages 57-62.

Ard, Wisut Chamsa, Brundavanam, Sridevi, Fung, Chun Che, Fawcett, Derek and Poinern, Gerrard (2017). Nanofluid Types, Their Synthesis, Properties and Incorporation in Direct Solar Thermal Collectors: A Review, Nanomaterials 2017, 7, 131; doi:10.3390/nano7060131.

Arivalagan, Aravinth Rajꓼ Karthik, Vaduganathanꓼ Ramji, R.ꓼ Venkatakrishnan, P. G. (2019). Synthesis and characterization of Ag and Al doped ZnO dispersed nanofluids for heat transfer applications, material study, 2019.

Chakraborty, Samarshi, Sarkar, Ishita, Ashok, Avinash, Sengupta, Iman, Pal, Surjya K., Chakraborty, Sudipto, (2018). Synthesis of Cu-Al LDH nanofluid and its application in spray cooling heat transfer of a hot steel plate, Powder Technology, Volume 335, 15 July 2018, Pages 285-300.

Chang, Hoꓼ Chang, Yu-Chun (2008). Fabrication of Al2O3 nanofluid by a plasma arc nanoparticles synthesis system, Journal of Materials Processing Technology, Volume 207, Issues 1–3, 16 October 2008, Pages 193-199.

Chopkar, Manoj, Das, Prasanta K., Manna, Indranil (2006). Synthesis and characterization of nanofluid for advanced heat transfer applications, Scripta Materialia, Volume 55, Issue 6, September 2006, Pages 549-552.

Gao, Ting-Ting, Wang, San-Ming (2018). Fuzzy integrated Evaluation Based on HAZOP, Procedia Engineering, 211 (2018) 176–182.

Haldorai, Yuvaraj, JinShim, Jae (2014). Facile synthesis of CuO nanospindles from a 3D coordination complex and its application to nanofluids, Letters, Volume, 1 February 2014, Pages 5-8.

Kao, M. J., Lo, C. H., Tsung, T. T. , Wu, Y. Y., Jwo, C. S., Lin, H. M. (2007). Copper-oxide brake nanofluid manufactured using arc-submerged nanoparticle synthesis system, Journal of Alloys and Compounds, Volumes 434–435, 31 May 2007, Pages 672-674.

Kotek, L.ꓼ Tabas, M. (2012). HAZOP study with qualitative risk analysis for prioritization of corrective and preventive actions, Procedia Engineering 42 (2012) 808 – 815.

Leena, M.ꓼ Srinivasan, S. (2015). Synthesis and ultrasonic investigations of titanium oxide nanofluids, Journal of Molecular Liquids, Volume 206, June 2015, Pages 103-109.

Nabeel Rashin, M., Hemalatha, J. (2013). Synthesis and viscosity studies of novel ecofriendly ZnO–coconut oil nanofluid, Experimental Thermal and Fluid Science, Volume 51, November 2013, Pages 312-318.

Paul, Gayatri; Kumar Das, Prasanta; Manna, Indranil (2016). Synthesis, characterization and studies on magneto-viscous properties of magnetite dispersed water based nanofluids, Journal of Magnetism and Magnetic Materials, 48 (11), 29-39 http://dx.doi.org/10.1016/j.jmmm.2015.11.085

Phuoc, Than X., Soong, Yee, Chyu, Minking K. (2007). Synthesis of Ag-deionized water nanofluids using multi-beam laser ablation in liquids, Optics and Lasers in Engineering, Volume 45, Issue 12, December 2007, Pages 1099-1106.

Suresh, S., Venkitaraj, K. P., Selvakumar, P., Chandrasekar, M. (2011). Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical properties, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 388, Issues 1–3, 5 September 2011, Pages 41-48.

Wan, Meher, Yadav, R. R., Yadav, K. L., Yadaw, S. B. (2012). Synthesis and experimental investigation on thermal conductivity of nanofluids containing functionalized Polyaniline nanofibers, Experimental Thermal and Fluid Science, Volume 41, September 2012, Pages 158-164.

Wei, Xiaohao, Kong, Tiantian, Zhu, Haitao, Wang, Liqiu (2010). CuS/Cu2S nanofluids: Synthesis and thermal conductivity, International Journal of Heat and Mass Transfer, Volume 53, Issues 9–10, April 2010, Pages 1841-1843.

Wei, Xiaohao, Zhu, Haitao, Kong, Tiantian, Wang, Liqiu (2009). Synthesis and thermal conductivity of Cu2O nanofluids, International Journal of Heat and Mass Transfer, Volume 52, Issues 19–20, September 2009, Pages 4371-4374.

Zhao, Mingwei, Lv, Wenjiao, Li, Yuyang, Dai, Caili, Zhou, Hongda, Song, Xuguang and Wu, Yining (2018). A Study on Preparation and Stabilizing Mechanism of Hydrophobic Silica Nanofluids, Materials 2018, 11, 1385; doi:10.3390/ma11081385.