Determination of the reasons for the lower injectivity of the injection wells

  • N. R. Krivova Universidad del Zulia

Resumen

The injection of water into the formations to maintain their pressure is accompanied by loss of injectivity in the injection wells. It is necessary to determine the reasons for the loss of injectivity to apply various methods of regulation of the characteristics of the filtration tank in the area of the bottom of the formation, which will allow to restore the injectivity of the wells and increase the coverage of the formation by flooding. of water. The document presents the results of the determination of the alleged causes of a loss of injection well injection, the hypotheses to determine the causes of a loss of injection and the studies conducted to confirm or refute the causes mentioned.

Descargas

La descarga de datos todavía no está disponible.

Biografía del autor/a

N. R. Krivova, Universidad del Zulia
Profesor de la Universidad del Zulia

Citas

Alvard, A. A., & Tokarev, M. A. (2002). Methodology of restoration and increase of injectivity of injection wells. Interval, 12, 44- 47

Alvard, A. A., Tokarev, M. A., Smirnov, V. B., & Islamov, R. G. (2001). A systematic approach to the restoration and increase of potential injectivity and productivity of wells, with account of the structural and texture features of the development object reservoirs. Oil and Gas Problems: Materials of the III Congress of Oil and Gas Producers of Russia. Ufa, 191-192.

Ahmadov, T. R. (2019). Method of determining the location of the pinch point using seismic survey in some areas of the Absheron Peninsula, Revista de la Universidad del Zulia, 10 (26), 82-97.

Basniev, K. S., Kochina, I. N., & Maksimov, V. M. (1993). Underground hydromechanics. Nedra, Moscow.

Buckley, J. S., & Morrow, N. R. (2011). Improved oil recovery by low-salinity waterflooding. J. of Petroleum Technology, 2, 106–113.

Goldberg, V. M., & Skvortsov, N. P. (1986). Permeability and filtration in clays. M.,“Nedra.

Kibalenko, I. A., & Stupochenko, V. E. (1992). Investigation of the impact of a gradual decrease in water salinity on the dilatation of the reservoir clay component. Collection of research papers VolgogradNIPIneft, 52, 127-135.

Kozhevnikov, A. V. (2016). The effect of salinity of injected water on the permeability and oil recovery of reservoirs. Scientific forum. Siberia, 2(3), 64-65.

Kuznetsov, N. P., & Muzipov. H. N. (2010). Reducing reservoir mudding in injection wells. Oil industry, 2, 38-39.

Mirchink, M. F., Mirzadzhanzade, A. Kh., & Zheltov, Yu. V. (1975). Physico-geological problems of enhanced oil recovery. M .: Nedra, p.230.

Pesotsky, S. A. & Perovsky, D. A. (2015). Analysis of uncertainties and risk assessment by technological indicators on the development of promising deposits and areas. Scientific and Technical Bulletin of OAO NK-Rosneft, 40, 53-59.

Stupochenko, V. E., & Avanesov, I. G. (1991). Features of the process of displacement from reservoirs with dilatating clays. Exp. inform. Ser. Oil field development and oil recovery enhancement methods, 6, 9-13.

Tang, G., & Morrow, N. R. (2002). Injection of dilute brine and crude oil/brine/rock interactions. Environmental Mechanics: Water, Mass and Energy Transfer in the Biosphere, 129, 171-179.

Zakharova, E. F., Shaidullin, L. K., Levanova, Y. V., Gumerova, D. M., & Sayakhov V. A. (2016). Some aspects of reservoir pressure maintenance. 16th International Multidisciplinary Scientific GeoConference SGEM 2016. Geology. Albena, Bulgaria, 1, 557-562.

Publicado
2020-03-26
Cómo citar
Krivova, N. R. (2020). Determination of the reasons for the lower injectivity of the injection wells. Revista De La Universidad Del Zulia, 11(29), 193-204. https://doi.org/10.46925//rdluz.29.12